Statement of Attainment in Design and Install Grid Connected Photovoltaic Systems Course Online - TAFE Digital Skip to content Skip to page navigation

Statement of Attainment in Design and Install Grid Connected Photovoltaic Systems

TAFE NSW Course Number: 900-80934V01

Nominal Hours: 120

Full Fee: $2,290

Read more

The student will learn about solar energy, its behaviour, how to design a Photovoltaic system to get optimum performance at a customer’s installation and how to install and commission a Grid-connected system.


There are no information sessions currently scheduled for this course.


This is an online course. You will need to complete approximately 2 hours of online study, each week, for your enrolment duration of 26 weeks.
You can increase the hours of online study per week to complete the course sooner.

As well as the online component, there is a requirement to equivalent of 1 hours of face to face or other study per week. Students will need to attend practical skills assessments at TAFE NSW Mount Druitt in Western Sydney. These are mandatory.

You can also expect to complete approximately 4 hours of additional study each week outside of class hours, including private study, research and assignment preparation.

To ensure you leave us with the most up to date qualification...

If during or after your enrolment, the course in which you are enrolled is updated in line with national industry standards, the Institute reserves the right to transition you into an alternate course. If this becomes necessary, the Institute will advise you of the change and the arrangements which will be available for you to complete your alternate course.

Solve basic problems in photovoltaic energy apparatus and systems UEENEEK125A, Install low voltage wiring and accessories UEENEEG103A, Solve problems in d.c. circuits UEENEEE104A, Document and apply measures to control OHS risks associated with electrotechnology work UEENEEE137A and Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits UEENEEE108A or erminate cables, cords and accessories for low voltage circuits UEENEEG106A.

Are there any additional entry requirements?

A number of courses may require prospective students to provide additional information such as documentation, an expression of interest, evidence that you are already employed as an apprentice, or preferred prior study (or equivalent).

To be enrolled in this course, you need to be able to provide evidence that you:

  • hold a current Electrician's License or a Statement of Attainment confirming prerequisite units held.

To successfully complete this course, you will need:

  • to complete all units

Demonstration of practical skills are requirements of this course. Due to the impacts of COVID 19 and the disruption to some practical workshops and workplace locations in the Electrotechnology Sector, there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe.

Credit (or recognition) for modules/units may be granted based on previous learning, studies, work and/or life experiences. Please discuss this with the teaching section when you enrol.

Photovoltaic (Solar) System Designer and/r Installer.

UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems
UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems
UEENEEK135A Design grid connected photovoltaic power supply systems

The above list includes units being offered at OTEN. If licensing in another state other than NSW is required, please check requirements with the relevant state.

You don't need to study what you already know! The skills, knowledge and experience you have gained from your previous learning, work experience and life in general may be taken into account.

To apply for recognition in one or more units you must clearly show that you have the equivalent and relevant skills, knowledge and experience of the unit or group of units.

For Credit transfer where you have completed previous studies either with TAFE NSW or with another tertiary provider complete the Enrolment Adjustment - Credit - Previous Studies form, and include any required evidence.

For Recognition of Prior Learning, attach your evidence to a completed Enrolment Adjustment – Credit – Recognition of Prior Learning (RPL) form and submit for assessment.

Send your applications to:


Post: OTEN Recognition, 51 Wentworth Road, Strathfield NSW 2135

Keep a copy of all completed forms for your records.

To find out more about Credit and to help you with your application read the Credit e-Kit for Students.

Need more help? Contact the Recognition Help Desk

Course cost: $2,290

This training is not subsidised by Government funding. There are no fee exemptions, concessions or subsidies available for this course.

Payment of course fee must be made PRIOR to commencement of learning activity.


You will need to provide for yourself the following resources which you will keep when you complete your study:

  • textbooks for this course. Estimated costs around $200.

Enrolling with us is easy, though the exact process does depend on your course and any prerequisites that go with it. Be sure to read all course information carefully to make sure it is the right qualification, location and study type for you. Enrol and pay online via our secure payment gateway to secure your place. As you progress through the enrolment process you will be prompted to provide additional information.

For further information or assistance, call 131 601.

20OTE-020 S:14/7/2020 E:10/1/2021 D:180

Download Adobe Reader To view some of the documents and forms on this website, you'll need the Adobe Reader software from Adobe, Inc.


ABN 89 755 348 137 | RTO Code 90003

Contact by Training Services NSW:
If your course has been funded by Training Services NSW under Smart and Skilled, you may be contacted by a Training Services NSW representative to discuss your experience at TAFE Digital.